FAQ´S   |   SITEMAP
Banner
       
  Newsletter Sign Up    
  Email Address  
   
  First Name  
   
  Last Name  
   
  Company Name  
   
Naneum instruments

Nano-ID NPS 500


The Nano-ID NPS500 sets a new standard for high sensitivity and selectivity aerosol measurements. It provides the ability to measure particle size distributions over a range of 5 nm to 500 nm with 128 user-selectable channels. Read More

Nano-ID Select

The Nano-ID Select is a wide-range sampler and is unique in that it spans the entire aerosol range from 2 nm up to 20 μm. Read More

 

 

Powder Aerosolizer PA100

The PA100 Powder Aerosolizer uses vibrating jets to create high velocity air streams that separate individual particles from a powder sample. The jets produce micro-vortices that essentially lift the particles from the powder surface. After the aerosol is generated, it is passed through a 10 liter gravitational separator to filter any remaining large particles or agglomerates. The separator also serves to stabilize the concentration of the generated aerosol.

No special training is required to operate the PA100 and set-up takes only a few minutes. The material of interest is loaded into the sample holder and the jet nozzle is located above the material surface. The output aerosol concentration is easily controlled by adjusting the applied air pressure and the vertical position of the jet nozzle relative to the surface of the material. Particle Measuring Systems PMC500 Particle Mobility Classifier is a complimentary instrument that can be used downstream to produce a user-defined monodisperse size distribution.

FEATURES

  • User adjustable ultrafine and primary particle concentrations.
  • 1 nm to 10 μm particle size range.
  • Low sample consumption, operates with as little as 0.5 mg of material.
  • Highly stable aerosol output.
  • Easy to use, no special training required

APPLICATIONS

  • General aerosol research.
  • Ecotox studies.
  • Inhalation and toxicology research.
  • Nano materials manufacturing

SPECIFICATIONS

Particle Size Range*:     1 nm – 10 μm
Sample material:     Minimum of 0.5 mg
Flow Rate:     User-selectable, 10 – 95 sccm;± 5% accuracy
Gases Supply:     Requires a source of clean dry air, 0.5 bar minimum pressure

 

* The achievable particle size range is material-dependent
 
Copyright 2010 © Naneum - All Rights Reserved.